Modification de Reflex LiveLoop

=Reflex LiveLoop=
[[Fichier:ReflexPanSm.jpg|none|200px|thumb|Reflex LiveLoop]]

==ShortCut List Memo==


{| class="wikitable"
! scope="col"|Action
! scope="col"|Operation
|-
|'''MODE'''+'''P.SEL'''
|enter in '''broken echo mode''', Echo LED will slowly flash
|-
|'''REC T/F/C''' button for 1 second until all of the LED Circle flashes
|setting the '''Clock Divider''' with rate button
|-
|long press '''REC'''
|stop PR record and/or play
|-
|>1s press '''SLICE'''
|stop play slice
|-
|>4s press '''SLICE'''
|erase all slices
|-
|>4s press '''SLICE SEL''' (don't release when the LED circle flashes, wait another second then release)
|enter in config menu
|-
|'''SLICE''' + '''REC''' while in SLICE SEL mode
|enter into '''Slice Sequencer''', '''SLICE''' add a step, then '''REC''' to play the seq, press '''SLICE''' >1s to exit
|-
|long press '''PLAY'''
|stop play fx
|-
|'''P.SEL''' while playfx
|fine tune for END/SIZE
|-
|'''PLAY''' and within 1sec '''REC''' while  playfx on a playing slice
|edit and save the slice from the playing loop, including the rate if changed. Make sure the Feedback control is turned UP TO MAX as this is how the PlayFX audio will get back into the sampler
|-
|move '''RATE''' (slice sel), then '''SLICE''' and within 1sec '''REC''' while  playfx on a playing slice
|copy the slice to the new slice position (By re-entering PlayFX, the original Slice can be recalled and saved if this is accidental)
|-
|PlayFX knobs all the way to the left, Play Slice, '''PlayFx''' then '''REC''' within 1s
|remove the slice
|-
|G-Move mode, '''REC''' button, the '''PLAY'''
|'''live pitch shift''', Rate control pitch-shift the audio
|-
|hold the '''P.SEL''' button > 1 second
|enter in '''Stutter''' mode, the 2 red PlayFX LEDs will light
|-
|long press on '''EQ SEL'''
|go to Flash8 menu to select a session
|-
|press and hold '''SLICE''' + '''REC'''
|'''to erase the entire memory''', all of the LED circle, will light as when erasing Slices, but for about 2 seconds.
|}

== tips == 
*'''PlayFX Clock Trigger Output''' If the REC T/F/C trigger input is switched to CLK, each PlayFX loop will output a trigger.

*'''Slice Clock Trigger Output''' If REC T/F/C trigger input is switched to CLK, slice loops will output a trigger pulse that can be used to sync other
modules to the Reflex LiveLoop! The TRIG LED will flash to indicate a trigger output.

== Links ==
http://www.freshnelly.com/reflex/reflexhtml.htm