De Modules Notes
(→tips) |
(→ShortCut List Memo) |
||
Ligne 34 : | Ligne 34 : | ||
|hold the '''P.SEL''' button > 1 second | |hold the '''P.SEL''' button > 1 second | ||
|enter in '''Stutter''' mode, the 2 red PlayFX LEDs will light | |enter in '''Stutter''' mode, the 2 red PlayFX LEDs will light | ||
+ | |- | ||
+ | | tap the loop button, then within 2 sec the Psel button, Once in DJ mode, just tap Play button as usual . To exit DJ mode, just tap the P.SEL button to return to the normal PlayFX modes. | ||
+ | |enter in '''DJ Mode''' mode, the 2 red PlayFX LEDs will light, This PlayFX allows panning through the sample in forward and reverse with the top PlayFX knob, or with a bipolar CV offset, and the bottom knob is a Slew control, also with a CV offset. The knob/CV access to move around the sample actually changes the Rate/speed from center either way, forward or reverse so simulates a record platter being turned. | ||
|} | |} | ||
Version actuelle en date du 14 mai 2019 à 22:23
Reflex LiveLoop[modifier]
ShortCut List Memo[modifier]
General | |
---|---|
Action | Operation |
long press REC | stop PR record and/or play |
long press PLAY | stop play fx |
P.SEL while playfx | fine tune for ST/GM/POS as well as END/SIZE, and while Stutter is fine Stutter thumbs up |
Modes & effects | |
---|---|
Action | Operation |
MODE+P.SEL | enter in broken echo mode, Echo LED will slowly flash |
G-Move mode, REC button, then PLAY | live pitch shift, Rate control pitch-shift the audio |
hold the P.SEL button > 1 second | enter in Stutter mode, the 2 red PlayFX LEDs will light |
tap the loop button, then within 2 sec the Psel button, Once in DJ mode, just tap Play button as usual . To exit DJ mode, just tap the P.SEL button to return to the normal PlayFX modes. | enter in DJ Mode mode, the 2 red PlayFX LEDs will light, This PlayFX allows panning through the sample in forward and reverse with the top PlayFX knob, or with a bipolar CV offset, and the bottom knob is a Slew control, also with a CV offset. The knob/CV access to move around the sample actually changes the Rate/speed from center either way, forward or reverse so simulates a record platter being turned. |
Slices | |
---|---|
Action | Operation |
>1s press SLICE | stop play slice |
>4s press SLICE | erase all slices |
SLICE + REC while in SLICE SEL mode | enter into Slice Sequencer, SLICE add a step, then REC to play the seq, press SLICE >1s to exit |
PLAY and within 1sec REC while playfx on a playing slice | edit and save the slice from the playing loop, including the rate if changed. |
move RATE (slice sel), then SLICE and within 1sec REC while playfx on a playing slice | copy the slice to the new slice position (By re-entering PlayFX, the original Slice can be recalled and saved if this is accidental) |
PlayFX knobs all the way to the left, Play Slice, PlayFx then REC within 1s | remove the slice |
Settings & Menus | |
---|---|
Action | Operation |
REC T/F/C button for 1 second until all of the LED Circle flashes | setting the Clock Divider with rate button |
press and hold SLICE + REC | to erase the entire memory, all of the LED circle, will light as when erasing Slices, but for about 2 seconds. |
>4s press SLICE SEL (don't release when the LED circle flashes, wait another second then release) | enter in config menu |
long press on EQ SEL | go to Flash8 menu to save (REC), erase (SLICE), load (PLAY) a session |
tips[modifier]
- PlayFX Clock Trigger Output If the REC T/F/C trigger input is switched to CLK, each PlayFX loop will output a trigger.
- Slice Clock Trigger Output If REC T/F/C trigger input is switched to CLK, slice loops will output a trigger pulse that can be used to sync other
modules to the Reflex LiveLoop! The TRIG LED will flash to indicate a trigger output.
- Slice overdub: Slice playing then REC overdubs slice with new audio+slice playing, make sure the Feedback control is turned UP TO MAX as this is how the PlayFX audio will get back into the sampler