De Modules Notes
Version du 4 janvier 2017 à 18:27 par AutomaticHuman (discuter | contributions)
Reflex LiveLoop
ShortCut List Memo
Action | Operation |
---|---|
MODE+P.SEL | enter in broken echo mode, Echo LED will slowly flash |
REC T/F/C button for 1 second until all of the LED Circle flashes | setting the Clock Divider with rate button |
long press REC | stop PR record and/or play |
>1s press SLICE | stop play slice |
>4s press SLICE | erase all slices |
>5s press SLICE | enter in config menu |
SLICE + REC while in SLICE SEL mode | enter into Slice Sequencer, SLICE add a step, then REC to play the seq, press SLICE >1s to exit |
long press PLAY | stop play fx |
P.SEL while playfx | fine tune for END/SIZE |
SLICE and within 1sec REC while playfx on a playing slice | edit and save the slice from the playing loop, including the rate if changed |
move RATE (slice sel), then SLICE and within 1sec REC while playfx on a playing slice | copy the slice to the new slice position (By re-entering PlayFX, the original Slice can be recalled and saved if this is accidental) |
PlayFX knobs all the way to the left, Play Slice, PlayFx then REC within 1s | remove the slice |
hold the P.SEL button > 1 second | enter in Stutter mode, the 2 red PlayFX LEDs will light |
long press on EQ SEL | go to Flash8 menu to select a session |
press and hold SLICE + REC | to erase the entire memory, all of the LED circle, will light as when erasing Slices, but for about 2 seconds. |
tips
- PlayFX Clock Trigger Output If the REC T/F/C trigger input is switched to CLK, each PlayFX loop will output a trigger.
- Slice Clock Trigger Output If REC T/F/C trigger input is switched to CLK, slice loops will output a trigger pulse that can be used to sync other
modules to the Reflex LiveLoop! The TRIG LED will flash to indicate a trigger output.