De Modules Notes
Version du 5 janvier 2017 à 13:00 par AutomaticHuman (discuter | contributions)
Reflex LiveLoop
ShortCut List Memo
Action | Operation |
---|---|
MODE+P.SEL | enter in broken echo mode, Echo LED will slowly flash |
REC T/F/C button for 1 second until all of the LED Circle flashes | setting the Clock Divider with rate button |
long press REC | stop PR record and/or play |
>1s press SLICE | stop play slice |
>4s press SLICE | erase all slices |
>5s press SLICE SEL (don't release when the LED circle flashes, wait another second then release) | enter in config menu |
SLICE + REC while in SLICE SEL mode | enter into Slice Sequencer, SLICE add a step, then REC to play the seq, press SLICE >1s to exit |
long press PLAY | stop play fx |
P.SEL while playfx | fine tune for END/SIZE |
PLAY and within 1sec REC while playfx on a playing slice | edit and save the slice from the playing loop, including the rate if changed. Make sure the Feedback control is turned UP TO MAX as this is how the PlayFX audio will get back into the sampler |
move RATE (slice sel), then SLICE and within 1sec REC while playfx on a playing slice | copy the slice to the new slice position (By re-entering PlayFX, the original Slice can be recalled and saved if this is accidental) |
PlayFX knobs all the way to the left, Play Slice, PlayFx then REC within 1s | remove the slice |
G-Move mode, REC button, the PLAY | live pitch shift, Rate control pitch-shift the audio |
hold the P.SEL button > 1 second | enter in Stutter mode, the 2 red PlayFX LEDs will light |
long press on EQ SEL | go to Flash8 menu to select a session |
press and hold SLICE + REC | to erase the entire memory, all of the LED circle, will light as when erasing Slices, but for about 2 seconds. |
tips
- PlayFX Clock Trigger Output If the REC T/F/C trigger input is switched to CLK, each PlayFX loop will output a trigger.
- Slice Clock Trigger Output If REC T/F/C trigger input is switched to CLK, slice loops will output a trigger pulse that can be used to sync other
modules to the Reflex LiveLoop! The TRIG LED will flash to indicate a trigger output.