Sommaire

Reflex LiveLoop

Modes & effects
Action	Operation
MODE+P.SEL	enter in broken echo mode, Echo LED will slowly flash
G-Move mode, REC button, then PLAY	live pitch shift, Rate control pitch-shift the audio
hold the P.SEL button > 1 second	enter in Stutter mode, the 2 red PlayFX LEDs will light

Slices
Action	Operation
>1s press SLICE	stop play slice
>4s press SLICE	erase all slices
SLICE + REC while in SLICE SEL mode	enter into Slice Sequencer, SLICE add a step, then REC to play the seq, press SLICE >1s to exit
PLAY and within 1sec REC while playfx on a playing slice	edit and save the slice from the playing loop, including the rate if changed. Make sure the Feedback control is turned UP TO MAX as this is how the PlayFX audio will get back into the sampler
move RATE (slice sel), then SLICE and within 1sec REC while playfx on a playing slice	copy the slice to the new slice position (By re-entering PlayFX, the original Slice can be recalled and saved if this is accidental)
PlayFX knobs all the way to the left, Play Slice, PlayFx then REC within 1s	remove the slice

Settings & Menus
Action	Operation
REC T/F/C button for 1 second until all of the LED Circle flashes	setting the Clock Divider with rate button
press and hold SLICE + REC	to erase the entire memory, all of the LED circle, will light as when erasing Slices, but for about 2 seconds.
>4s press SLICE SEL (don't release when the LED circle flashes, wait another second then release)	enter in config menu
long press on EQ SEL	go to Flash8 menu to save (REC), erase (SLICE), load (PLAY) a session

PlayFX Clock Trigger Output If the REC T/F/C trigger input is switched to CLK, each PlayFX loop will output a trigger.

Slice Clock Trigger Output If REC T/F/C trigger input is switched to CLK, slice loops will output a trigger pulse that can be used to sync other

modules to the Reflex LiveLoop! The TRIG LED will flash to indicate a trigger output.